On-demand InkJet Printing System

CraftPix CPE Model

Flagship model with the highest printing speed in the CraftPix series.

Odoo • Image and Text

Super High Speed Printing Model


CPE model equipped with eight print heads is a flagship model that achieves printing speed exceeding the CPQ model. The shuttle table driven by a linear motor combines accuracy and high speed, and achieves the fastest printing in the CraftPix history. It is also possible to use it for legend printing in mass production lines, as well as for solder resists that require ink thickness. Overwhelming print speed will dramatically increase the productivity and brings innovation to your production site.

Dimensions [ unit: inch(mm) ]

Detailed Specifications of CPE6151

Max. Panel Size
24.6 x 21” (625 x 535 mm)
Max. Discharge Frequency 45 kHz
X-axis Resolution (dpi)
360 / 720 / 1080 / 1440 / 1800 / 2160
Y-axis Resolution (dpi)
360 / 720 / 1080 / 1440
Min. Droplet Size
6 pl / 13 pl
Number of Nozzles
8 x 1024 (8192)
Standard Resolution
720 dpi
Min. Line Width *1
70 µm–90 µm

Speed *2
22.8 x17” (580 x 430 mm): 6 seconds
24 x 20” (610 x 510 mm): 6 seconds
Number of Ink Tank
Ink Tank Volume (Max.)
1000 ml
On-Head UV Lamp *3
Camera Resolution
11.8 x 9.0 mm
Air Supply: Pressure
0.5 MPa
Air Supply: Volumetric flow rate
8 ft³/min. (225 ℓ/min.)
Power Supply *4
Single Phase AC200–240 V 50/60 Hz
30 A
3968 lbs. (1800 kg)

*1 Depends on ink

*2 While using UV pinning type ink, speed spec may change according to required UV energy. Print times do not include image alignment, shuttle and load and unload time. Please confirm the printing quality and speed by allowing us to run a benchmark test at MicroCraft.

*3 LED UV lamp to be mounted depends on the ink to be used.

*4 Separate power source for cooling device and vacuum pump is necessary (specifications may be different in some countries). § Replacement of ink requires special training § CraftPix consumables are ink, cleaning fluid, filter, sending fluid tube, UV lamp, array unit, vacuum paper, temperature sensor, heater, etc. § Please contact MicroCraft for detailed specification.

Operating Conditions

70–75°F (21–24°C), 30–70% relative humidity

* Free of moisture, dust (ISO class 7 (FED-STD-209D Class10,000) clean room or better), vibration, and corrosive gas.

Atmospheric Dew Point: −14°C or below (at 0.7 Mpa, dew point is 15°C or below)

Oil Mist Concentration: 1 mg/㎥ (ANR) or below

Common Specification

Board Thickness
0.004 to 0.24" (0.1 - 6.0 mm) *5
*compatibility for thickness exceeds 0.24" (0.6 mm) is optional
Alignment CCD Camera
Monitor Touch Screen LCD Monitor
Software Windows 7 / Windows 8 / Windows 10
Data Input Format RS274X, RS274D, ODB++, DPF, DXF, BMP *6 , TIFF *6

*5 When the vacuum table is used. Figures depend on the board warpage and clamp type. Printing quality may decrease with warpage. Please contact MicroCraft for more precise figures for specific conditions.

*6 Scaling and alignment functions are not usable.

Vacuum Pump*

Power Supply Three Phase AC200 V 10 A 50/60 Hz, AC220 V 10 A 60 Hz
50 Hz: 20.7 ft³/min. (575 ℓ/min.)
60 Hz: 24.7 ft³/min. (685 ℓ/min.)
Air Coupler Size RC 3/4
Weight 187.4lbs. (85 kg)

* Depends on clamping method

Inquiries about CraftPix series

Please feel free to contact us for questions regarding the machine specs, quotes, inquiries for a brochure from the following phone number or the inquiry form. The equipment seen in the lineup are customizable to address your needs.