On-demand InkJet Printing System
CraftPix CPS Model
Utilizes an ink cartridge system to supply ink to the print head. Most suitable for customers using multiple types of inks in small quantities.
Small Ink Quantity Model
CPS6151 / CPS7861
CPS uses a special ink cartridge for supplying ink to the print head unlike the regular supply tanks used in other CraftPix models. This model is most suitable for customer using multiple types of inks in small quantity for making experiment lot or using highly expensive inks such as silver nano ink.
High-resolution printing “Type F”
CPS6151F / CPS7861F
NEW
CPS models are available in “Type F”, which is equipped with a high-definition 1776 nozzles print head and a min. droplet size of 3.5pl. Model supporting superior print quality with small quantity of ink.
Detailed Specifications of
CPS6151
/
CPS6151F
|
|
CPJ6151 | CPJ6151F |
| Max. Panel Size | 24.6 x 21" (625 x 535 mm) |
24.6 x 21" (625 x 535 mm)
|
| Max. Discharge Frequency | 45 kHz | 80 khZ |
| X-axis Resolution (dpi) | 360 / 720 / 1080 / 1440 | 600 / 900 / 1200 / 1500 / 2400 |
| Y-axis Resolution (dpi) | 360 / 720 / 1080 / 1440 / 1800 / 2160 | 600 / 1200 / 1800 / 2400 |
| Min. Droplet Size | 6 pl / 13 pl | 3.5 pl |
| Number of Nozzles | 1 x 1024 | 1 x 1776 |
| Standard Resolution | 720 dpi | 600 dpi |
| Min. Line Width *1 |
70 µm–90 µm
|
40 µm–70 µm
|
| Speed *2 |
22.8 x 17" (580 x 430 mm): 32 seconds
24 x 20" (610 x 510 mm): 44 seconds |
22.8 x 17" (580 x 430 mm): 32 seconds
24 x 20" (610 x 510 mm): 51 seconds |
|
|
CPS6151 | CPS6151F |
| Number of Ink Tank | 1 | 1 |
| Ink Tank Volume (Max.) | 1000ml | 1000ml |
| On-Head UV Lamp *3 | Led-UV Lamp |
Led-UV Lamp
|
| Camera Resolution | 8.4 x 6.3 mm | 8.4 x 6.3 mm |
| Air Supply: Pressure | 0.5 MPa | 0.5 MP |
| Air Supply: Volumetric flow rate |
2.7 ft³/min. (75 ℓ/min.)
|
2.7 ft³/min. (75 ℓ/min.)
|
|
Power Supply
*4
Single Phase AC200-240V 50/60 Hz
|
15 A | 15 A |
| Weight | 1543 lbs. (700kg) | 1543 lbs. (700kg) |
| Dimensions [ unit: inch (mm) ] |
|
|
*1 Depends on ink
*2 While using UV pinning type ink, speed spec may change according to required UV energy. Print times do not include image alignment, shuttle and load and unload time. Please confirm the printing quality and speed by allowing us to run a benchmark test at MicroCraft.
*3 LED UV lamp to be mounted depends on the ink to be used.
*4
Separate power source for cooling device and vacuum pump is necessary (specifications may be different in some countries). § Replacement of ink requires special training § CraftPix consumables are ink, cleaning fluid, filter, sending fluid tube, UV lamp, array unit, vacuum paper, temperature sensor, heater, etc. § Please contact MicroCraft for detailed specification.
Operating Conditions
70–75°F (21–24°C), 30–70% relative humidity
* Free of moisture, dust (ISO class 7 (FED-STD-209D Class10,000) clean room or better), vibration, and corrosive gas.
Atmospheric Dew Point: −14°C or below (at 0.7 Mpa, dew point is 15°C or below)
Oil Mist Concentration: 1 mg/㎥ (ANR) or below
Detailed Specifications of CPS7861 / CPS7861F
|
|
CPJ7861 | CPJ7861F |
| Max. Panel Size | 31.3 x 25.6” (795 x 651 mm) |
31.3 x 25.6” (795 x 651 mm)
|
| Max. Discharge Frequency | 45 kHz | 80 khZ |
| X-axis Resolution (dpi) | 360 / 720 / 1080 / 1440 | 600 / 900 / 1200 / 1500 / 2400 |
| Y-axis Resolution (dpi) | 360 / 720 / 1080 / 1440 / 1800 / 2160 | 600 / 1200 / 1800 / 2400 |
| Min. Droplet Size | 6 pl / 13 pl | 3.5 pl |
| Number of Nozzles | 1 x 1024 | 1 x 1776 |
| Standard Resolution | 720 dpi | 600 dpi |
| Min. Line Width *1 |
70 µm–90 µm
|
40 µm–70 µm
|
| Speed *2 |
22.8 x 17" (580 x 430 mm): 32 seconds
24 x 20" (610 x 510 mm): 44 seconds 30.7 x 24” (780 x 610 mm): 59 seconds |
22.8 x 17" (580 x 430 mm): 32 seconds
24 x 20" (610 x 510 mm): 51 seconds 30.7 x 24” (780 x 610 mm): 59 seconds |
|
|
CPi7861 | CPi7861F |
| Number of Ink Tank | 1 | 1 |
| Ink Tank Volume (Max.) | 1000ml | 1000ml |
| On-Head UV Lamp *3 | Led-UV Lamp |
Led-UV Lamp
|
| Camera Resolution | 8.4 x 6.3 mm | 8.4 x 6.3 mm |
| Air Supply: Pressure | 0.5 MPa | 0.5 MP |
| Air Supply: Volumetric flow rate |
2.7 ft³/min. (75 ℓ/min.)
|
2.7 ft³/min. (75 ℓ/min.)
|
|
Power Supply
*4
Single Phase AC200-240V 50/60 Hz
|
15 A | 15 A |
| Weight | 2205 lbs. (1000 kg) | 2205 lbs. (1000 kg) |
| Dimensions [ unit: inch (mm) ] |
|
|
*1 Depends on ink
*2 While using UV pinning type ink, speed spec may change according to required UV energy. Print times do not include image alignment, shuttle and load and unload time. Please confirm the printing quality and speed by allowing us to run a benchmark test at MicroCraft.
*3 LED UV lamp to be mounted depends on the ink to be used.
*4
Separate power source for cooling device and vacuum pump is necessary (specifications may be different in some countries). § Replacement of ink requires special training § CraftPix consumables are ink, cleaning fluid, filter, sending fluid tube, UV lamp, array unit, vacuum paper, temperature sensor, heater, etc. § Please contact MicroCraft for detailed specification.
Operating Conditions
70–75°F (21–24°C), 30–70% relative humidity
* Free of moisture, dust (ISO class 7 (FED-STD-209D Class10,000) clean room or better), vibration, and corrosive gas.
Atmospheric Dew Point: −14°C or below (at 0.7 Mpa, dew point is 15°C or below)
Oil Mist Concentration: 1 mg/㎥ (ANR) or below
Common Specification
| Board Thickness |
0.004 to 0.24" (0.1 - 6.0 mm)
*5
*compatibility for thickness exceeds 0.24" (0.6 mm) is optional
|
| Alignment |
CCD Camera
|
| Monitor |
Touch Screen LCD Monitor
|
| Software | Windows 7 / Windows 8 / Windows 10 |
| Data Input Format | RS274X, RS274D, ODB++, DPF, DXF, BMP *6 , TIFF *6 |
*5 When the vacuum table is used. Figures depend on the board warpage and clamp type. Printing quality may decrease with warpage. Please contact MicroCraft for more precise figures for specific conditions.
*6 Scaling and alignment functions are not usable.
Vacuum Pump*
| Power Supply |
Three Phase AC200 V 10 A 50/60 Hz, AC220 V 10 A 60 Hz
|
| Capacity |
50 Hz: 20.7 ft³/min. (575 ℓ/min.)
60 Hz: 24.7 ft³/min. (685 ℓ/min.)
|
| Air Coupler Size |
RC 3/4
|
| Weight | 187.4lbs. (85 kg) |
* Depends on clamping method
Inquiries about CraftPix series
Please feel free to contact us for questions regarding the machine specs, quotes, inquiries for a brochure from the following phone number or the inquiry form. The equipment seen in the lineup are customizable to address your needs.